An Introduction to Double Glazed Glass
One of the sea changes in window technology for improvements in the areas of energy efficiency and comfort between residential and commercial buildings was double-glazed glass-or, more correctly, the Insulated Glass Unit. How this double-glazed glass is installed, maintained, and the benefits associated with doing so will be elaborated on in great detail in this guide so you can understand what to expect to make an informed decision on applying this technology to your property.
What is Double Glazed Glass?
Double glazed means two sheets of glass, parallel to each other, with spacing between them that contains a gas, usually argon or krypton gas. All the composition above acts like a physical barrier and tends to increase insulation against the flow of heat, pollution by noise, or condensation. Gaps between the glass panes work like thermal buffers and help in blocking off heat from escaping during winter and keeping it out during summer.
What’s really good about double glazed glass
1. Better Energy Efficiency
Among the major benefits, double-glazed glass also provides better energy efficiency. The filling of the gas between the panes acts as insulation, which helps in maintaining the indoor temperature equably because heating or cooling works accordingly to the outside conditions. That way, it will help cut back on bills, and the world will also turn out to be greener due to the fact that the carbon footprint is reduced.
2. Better Sound Insulation
The sound insulation of these windows is very high, hence it serves right in those areas that are normally noisy within the house or office. This is because the several layers of glass, if combined with a cavity of gas, reduce the transmission of most of the sound from the outside into the room, hence making the indoor environment relatively quiet and peaceful.
3. More Security
Double-glazed glass units bring added security during the construction process more than single-paned windows because one is more likely to find a hard time breaking through them due to the thickness and strength increased by the two layers of glass.
4. Condensation Reduction
This can lead to other problems associated with mould growth and timber decay in the window frame. A double-glazed glass will significantly reduce such condensation because of its even surface temperature and not allowing condensation of moisture at a glass surface inside windows.
5. UV Protection
The UV filtering capability of double glazing glass can also be achieved with special films or coatings which eliminate the penetration of dangerous rays. This will prevent dullness from setting in your furnishings, carpets, and artwork colours due to continuous exposure to sunlight.
Types of Double Glazing Glass
1. Low-E Glass
Low-e glass can reflect heat back into the room, offering microscopic, transparent coating and natural light transmittance. It provides better thermal insulation, hence cutting on the energy consumption; hence, this material should be perfect in building low-energy buildings.
2. Argon Gas Filled Glass
Glass filled with argon gas Argon is one of the most common gases used in filling the space between double-glazed glass panes. Being an inert gas, it would thus tend to improve on features of thermal insulation in glass by lowering the rate of heat transfer, generally improving energy efficiency.
3.Krypton Gas Filled Glass
Glass filled with Krypton gas The second gas in the inert gas used in double-paned window glazing is krypton. With a far lower conductivity value than that of argon, in high-performance windows it could thus mean more insulating properties, or more exactly when the space between the panes is reduced.
Installation of Double Glazed Glass
1. Selection of Competent Installer
Fitting double-glazed glass is, however, a delicate job, which requires the hand of an expert. It would be worth finding the right professional, for he or she will have experience in fitting IGUs, hence efficiency in performance, and that the window lasts a lifetime. Any good installer would first take a good look at your property, advise on the best type of double-glazed glass that would suit your needs, and then fit it correctly.
2. Measurement and Preparation
Measure is where all emanates with the right installation. The installer should then take painstakingly very accurate dimensions of all window openings and make frames that should house double-glazed units. Proper preparation will keep all chances of air leaks away together with poor fitting.
3. Installation Overview
With that, the double-glazed glass units can be installed in the prepared frames. From there, the installer makes sure that the units are set and squared properly. Sealing is then done so that no drafts or ingress of moisture could occur. Ultimately, the new windows would come in sealed and functioning completely.
Maintenance of Double Glazed Glass
1. Maintenance Cleaning Maintenance
Double-glazed glass will require occasional cleaning so that it can remain clean and functional. Apply the soft non-abrasive cleaner lightly to the surface of the glass with a soft cloth. Do not use abrasives, scouring pads, and chemicals because they can be very harsh on the glass and seals.
2. Check Seals and Frames
Over the years, check your seal and the frame surrounding your double-glazed window for probable deterioration. A well-kept seal can be of vast help in preserving the insulating property of the glass. The broken seals need replacement as their job is preventing energy from escaping, allowing the optimal operation to take place on a constant basis.
3. Immediate Remedy
Take immediate corrective action in case it is discovered that your double-glazing suffers from any of the following defects such as condensation between panes, operational difficulties with the window, etc. Do not wait until the damage is done and the window becomes inefficient. Allow professionals to diagnose and repair flaws once discovered.
Conclusion
Double-glazed glass when fitted into your home would offer you a wide range of benefits including more insulation, sound proofing as well as better security among many others. So, the improvement in the level of comfort within a house or office would be done with the types one wishes to have installed, at what extent of upkeep later on is needed.
